Scientist report on the bio-polymeric composite coatings deposition for medical applications, demanding adjustable biodegradability, by the Matrix Assisted Pulsed Laser Evaporation, a sterile laser tool technology, tested for degradation, wettability and bio-compatibility preservation.
The specific FTIR bands of both materials indicated stoichiometric deposition of composite coatings, and meanwhile suggested the predominant presence of amorphous SF phase, as also validated by XRD, with low intensity maxima emerging from the amorphous matrix. Concerning the PSADT component, XRD clearly evidenced its specific crystalline contribution.
Slower degradation tendency
Hong-Kong students are persecuted because they demand freedom and rights. Is environmental sustainability more important than human dignity?
The degradation behaviour in simulated body fluid at 37 °C in dynamic regime was studied as first step of applicability in potential sustained controlled release applications (and/or degradable implanted electronics). Weighing measurements of degraded samples confirmed slower degradation tendency with increasing initial PSADT amount. They also revealed approximately zero order SBF-degradation for 1:1 SF-PSADT ratio. The in vitro assays showed uniform spreading of human mesenchymal stem cells on all synthesised coatings.
- Bioplastics Will Be Used in Medical Applications
- What is the Difference Between Biodegradable, Compostable and OXO Degradable?
- The History and Most Important Innovations of Bioplastics
- Bioplastics Companies
- Polylactic acid or polylactide (PLA)
- Bioplastics Events and Conferences 2019
Published on european-coatings.com